
The Lumet Focus features a sharp, concentrated beam that delivers precise illumination. Perfectly suited as a reading or task light beside the bed in luxury hotel rooms or personal bedrooms, its tiltable and adjustable head allows you to direct the light exactly where it's needed.
| No. | Item / Description | Details / Requirements |
|---|---|---|
| 1 | General Requirement | Must be of contract quality and suitable for commercial use. Fabrication to be in accordance with HBA Preambles |
| 2 | Description | Movable track light with adjustable angle. Refer to plans, elevations, and all drawings for exact location and quantity. |
| 3 | Model | Custom |
| 4 | Reference Detail | Refer to drawing MRX1021 for detail. |
| 5 | Overall Dimensions | 50mm (W) × 50mm (D) × 153mm (H) Refer to plans, elevations, and all drawings for exact dimensions. |
| 6 | Weight | To be verified by lighting consultant/manufacturer. |
| 7 | Finish | Metal in MT-2 (Metal Finish), as per HBA-approved sample. Manufacturer to submit sample to HBA for approval. |
| 8 | Height Above Floor | To be verified on site. |
| 9 | Shade | Metal in MT-2 (Metal Finish), as per HBA-approved sample. Manufacturer to submit sample to HBA for approval. |
| 10 | Lamp | Wattage to be verified by lighting consultant/manufacturer. |
| 11 | Maximum Wattage | To be verified by lighting consultant/manufacturer. |
| 12 | Wiring | Fixture to be hardwired. |
| 13 | Control System | Fixture to be on dimming system. |
| 14 | Metal Protection | All metal parts to be corrosion-proof or receive powder-coated finish. Includes shade and base components. |
| 15 | Electrical Rating | Fixture to be wired for 220 Volt usage in China. |
| 16 | Code Compliance | Fixture must meet all applicable codes. |
| 17 | Certification | Fixture must be U.L. approved (USA) or equivalent per country of origin. |
| 18 | Environmental Suitability | All materials used must be suitable for use in tropical and high humidity areas. |
| 19 | Sample / Prototype | Manufacturer to provide sample or prototype of light fixture to HBA for approval prior to production. |
| 20 | Finish Sample | Manufacturer to provide finish sample to HBA for approval prior to production. |
| 21 | Weight Confirmation & Installation | Manufacturer to confirm fixture weight. Contractor or lighting consultant is wholly responsible for installation based on fixing/weight details provided by Project Manager or Lighting Consultant. |
| 22 | Shop Drawings | Manufacturer to provide shop drawings to HBA for approval prior to production. |
| 23 | Installation Verification | Manufacturer to verify installation method and hanging points. |
| 24 | Drawing Scale Requirement | Shop drawings must be in 1:10 scale and show all visible blocking. |